Phoenix 1200 Inverter (12v)

The inverter Phoenix Inverter Compact is a pure sine wave inverter with a high efficiency that is designed for professional service and suitable for a wide range of energy applications. The solar inverter Phoenix Inverter Compact is available from 1200VA to 2000VA in 12V or 24V.

News of the solar inverter Phoenix Inverter Compact 12V 1200Va
SinusMax – Superior design
Developed for professional use, the Phoenix range of inverters is ideal for countless applications. The criteria used in its design was to produce a true sinusoidal inverter with optimized efficiency but without compromising its performance. By using high frequency hybrid technology, we obtain as a result a product of the highest quality, with compact dimensions, lightweight and capable of supplying power, without problems, to any load.

Additional starting power
One of the unique characteristics of SinusMax technology is its very high starting power. Conventional high-frequency technology does not offer such extraordinary performance. Phoenix inverters, however, are well suited to power difficult loads, such as refrigerators, compressors, electric motors and similar devices.

Virtually unlimited power thanks to parallel and three-phase operation
Up to 6 inverter units can operate in parallel to achieve higher output power. Six 24/5000 units, for example, will provide 24 kW / 30 kVA of output power. It is also possible to configure it for three-phase operation.

Transfer of the load to another source CA: the automatic transfer switch
If an automatic transfer switch is required, we recommend using the MultiPlus inverter / charger instead. The switch is included in this product and the MultiPlus charger function can be disabled. The computers and other electronic equipment will continue to operate without interruption, since the Phoenix has a very short switching time (less than 20 milliseconds).

Interface for the computer
All models have an RS-485 port. All you need to connect to your PC is our MK2 interface (see the section “Accessories”) This interface is responsible for the galvanic isolation between the inverter and the computer, and converts the RS-485 socket into RS-232. an RS-232 USB conversion cable, together with our VEConfigure software, which can be downloaded for free from victron.com, you can customize all inverter parameters, including voltage and output frequency, overvoltage settings or Undervoltage and relay programming This relay can, for example, be used to signal several different alarm conditions, or to start a generator.
The inverters can also be connected to VENet, the new power control network of Victron Energy, or to other computer monitoring and control systems.

New applications for high power inverters
The possibilities offered by the high power inverters connected in parallel are really amazing. To obtain ideas, examples and calculations of battery capacity, please consult our book “Electricity on board”, available for free at Victron Energy and downloadable.

Parallel and three-phase operation Yes

Technical specifications of the solar inverter Phoenix Inverter Compact 12V 1200Va
Investor.-

Input voltage range (V DC) 9.5 – 17V 19 – 33V 38 – 66V
Output Output: 230V ± 2% / 50 / 60Hz ± 0.1% (1)
Power cont. Output 25 ° C (VA) (2) 1200
Power cont. Output 25 ° C (W) 1000
Power cont. Output 40 ºC (W) 900
Power peak (W) 2400
Max efficiency 12/24/48 V (%) 92
Vacuum consumption 12/24/48 V (W) 8
Vacuum consumption in AES mode (W) 5
Vacuum consumption Search mode (W) 2
General.-

Programmable relay (3): Yes
Protection (4): a – g
VE.Bus communication port: For parallel and three-phase operation, remote supervision and system integration
Common characteristics: Operating temperature: -20 to + 50 ° C (cooled by fan)
Humidity (without condensation): Max. 95%
Case.-

Common characteristics: Type of protection: IP 21
Battery connections: 1.5 meter battery cables included
Connections 230 V AC: Plug G-ST18i
Weight (kg): 10
Dimensions (to x to x to p in mm.): 375x214x110
Regulations.-

Security: EN 60335-1
Emissions / Immunity: EN 55014-1 / EN 55014-2
Automotive Directive: 2004/104 / EC
1) It can be set at 60 Hz, and at 240 V.
2) Non-linear load, crest factor 3: 1
3) Programmable relay that can be configured in general alarm, DC undervoltage or as a start signal for a generator (the MK2 interface and the VEConfigure software are required)
Rated capacity 230V / 4A AC
Rated capacity CC 4 A up to 35VDC, 1