Fluke 789-NIST ProcessMeter, includes ISO Certificate

Fluke 789-NIST Offers

This process meter doubles your troubleshooting power and is Fluke Connect-enabled

Ideal troubleshooting tool for electricians and instrumentation professionals, this process meter combines the functionality of a loop calibrator and the power of a digital multimeter. This instrument also comes supplied with the capabilities of Fluke Connect connectivity. Additionally, it comes equipped with a built-in selectable 250 ? HART? resistor which eliminates the need to carry a separate resistor and large and bright display.

Comes equipped with a 24-Volt loop supply, which reduces the need to carry a separate power supply when doing offline transmitter testing. You can add an optional temperature measurement module and the wireless data logging capabilities of the Fluke Connect? mobile app to log data wirelessly to your smartphone and review it from a remote location. So now process technicians can do a lot more while carrying a lot less.

This product includes an ISO Certificate with full Data and Uncertainties.

Features

20 mA dc current source/measure/simulate
Simultaneous mA and % of scale readout
DMM designed to meet 1000 volt IEC 61010 CAT III and 600 V CAT IV standards
Fluke Connect? compatibility for wireless data logging (with IR3000FC module)
Precision 1000 V, 440 mA True RMS digital multimeter
Frequency measurement to 20 kHz
Min/max/average/hold/relative modes
Diode test and continuity beeper
Manual step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
Externally accessible battery for easy battery changes
24 V Loop power supply
HART mode setting with loop power (adds 250 ohm resistor)
Provides 1200 ohm drive capability on mA source
Delivers 0.1% dc voltage accuracy and 0.05% dc current accuracy
Includes 0% and 100% buttons to toggle between 4 and 20 mA sourcing for a quick span check
Large dual display with enhanced two-level backlight brightness settings

Applications

Electrical and instrumentationFluke 789-NIST Offers

This process meter doubles your troubleshooting power and is Fluke Connect-enabled

Ideal troubleshooting tool for electricians and instrumentation professionals, this process meter combines the functionality of a loop calibrator and the power of a digital multimeter. This instrument also comes supplied with the capabilities of Fluke Connect connectivity. Additionally, it comes equipped with a built-in selectable 250 ? HART? resistor which eliminates the need to carry a separate resistor and large and bright display.

Comes equipped with a 24-Volt loop supply, which reduces the need to carry a separate power supply when doing offline transmitter testing. You can add an optional temperature measurement module and the wireless data logging capabilities of the Fluke Connect? mobile app to log data wirelessly to your smartphone and review it from a remote location. So now process technicians can do a lot more while carrying a lot less.

This product includes an ISO Certificate with full Data and Uncertainties.

Features

20 mA dc current source/measure/simulate
Simultaneous mA and % of scale readout
DMM designed to meet 1000 volt IEC 61010 CAT III and 600 V CAT IV standards
Fluke Connect? compatibility for wireless data logging (with IR3000FC module)
Precision 1000 V, 440 mA True RMS digital multimeter
Frequency measurement to 20 kHz
Min/max/average/hold/relative modes
Diode test and continuity beeper
Manual step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
Externally accessible battery for easy battery changes
24 V Loop power supply
HART mode setting with loop power (adds 250 ohm resistor)
Provides 1200 ohm drive capability on mA source
Delivers 0.1% dc voltage accuracy and 0.05% dc current accuracy
Includes 0% and 100% buttons to toggle between 4 and 20 mA sourcing for a quick span check
Large dual display with enhanced two-level backlight brightness settings

Applications

Electrical and instrumentation

Fluke 789-NIST Specifications

Current Measurement

Range
0 to 1 A AC or DC

Resolution
1 mA

Accuracy
0.2% + 2 LSD (DC)

Range
0 to 30 mA

Resolution
0.001 mA

Accuracy
0.05% + 2 lSD

Current Sourcing

Range
0 to 20 mA or 4 to 20 mA

Resolution
0.05% of span

Drive Capability
24 V Compliance or 1200 ? at 20 mA

Voltage Measurement

Range
0 to 1000 V AC (True RMS) or DC

Resolution
0.1 mV to 1.0 V

Accuracy
0.1% Rdg + 1 LSD (VDC)

Electrical Specifications

Frequency
To 19.999 kHz, 0.005% + 1 LSD

Continuity
Beeps for resistance <100 ? Resistance Measurement To 40 M?, 0.2% + 1 LSD Diode Test 2.0 V shoes diode voltage drop Display Current and % of Span Yes Auto Step, Auto Ramp Yes Environmental Specifications Operating Temperature -4 to 131?F (-20 to 55?C) Storage Temperature -40 to 140?F (-40 to 60?C) Humidity (Without Condensation) 95% up to 86?F (30?C) 75% up to 104?F (40?C) 45% up to 122?F (50?C) 35% up to 131?F (55?C) Temperature Coefficient 0.05 x (specified accuracy) per ?C (for temperatures <18?C or >28?C)

Safety Specifications

Electrical Safety
Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No 1010.1-92

Overvoltage Category
IEC 1010-1 CAT III 1000 V

IEC 1010-1 CAT IV 600 V

Maximum Voltage
1000 V RMS

Mechanical and General Specifications

Batteries
4 x AA Alkaline batteries

Battery Life
140 hours typical (measurement), 10 hours typical (sourcing 20 mA)

Shock and Vibration
Random, 2 g, 5 to 500 Hz

1 m drop test

Dimensions
1.25 x 3.41 x 7.35″ (50 x 100 x 203 mm)

Weight
1.6 lbs (610 g)

Click here for complete specifications on the Fluke 789-NIST

What’s included with the Fluke 789-NIST
Process Meter
ISO Certificate with full Data and Uncertainties
Test Lead Set
Alligator Clips
4 x AA Alkaline Batteries (Installed)
Quick Reference Guide

How To Set up the Fluke 789 ProcessMeter for Sourcing Milliamps

This video is a walkthrough of using a processmeter to source for milliamp DC currents. The ultimate troubleshooting tool for electricians and instrumentation professionals, combining the functionality of a loop calibrator with the power of a digital multimeter.